Multiple switches one power source

Dealing with electrical wires in any DIY project can be confusing and dangerous, but learning how to wire two light switches from just one power source is not any harder than using two sources. Bath Light and Fan On the Same Switch To Separate Switches - Duration: 16:28. The course was put together with the amateur in mind so it is pretty easy to follow yet powerful and effective.

I was planning to use 14-gauge wire for my lights, 12-for my vent and fan and 12-for my power outlets. Yes, you can have an individual power switch for each of the supplies while having only one physical switch.

This diagram illustrates wiring for one switch to control multiple lights.

With the second circuit, the neutral (white) simply nuts with the others.

For the hots (black), add two pigtails to the source hot and run one to each switch , just as you normally would. The only true difference in this over running to the light first . Wire or rewire multiple outlets in one box. This video explains how the two switch , two light circuit works. I know how to read open and shorts with an Ohmmeter . The ohms across its output terminals are undefine change from one model to the next, . The two black wires you have will go to . Double switches , sometimes called double pole, allow you to separately control the power being sent to multiple places from the same switch. What happens if the live wire is attached to one of the activators?

Odd that the bottom two switches still worked. I would think the power would have been . Best to deal with the one coming from the power source (panel) first. The remaining two wires (going to each set of lights) are wired separately to the second terminal on each switch. I guessing one is from the breaker box and the other two are the ceiling fan and outside light. Turn off the breaker that supplies power to the circuit.

A test on the circuit will verify you turned off the right breaker. Touch one lead from the two -lead tester to the black wire inside the switch box leading back to the circuit panel. The tester will not light if you turned off the right breaker. How To Wire Two Independent Switches with One Power Source. Greetings, About this time last year, I installed six LED lights in my cathedral ceiling in my living room.

I tired the Caseta products at that time, but was unable to get them to work in this location. I am now revisiting the possibility of trying them .