Accuracy for this step is vital, as any mistakes will mean your PC may not work as it should - or may not start at all. Computer system panel cable and connector Once the motherboard has been successfully physically installed into the computer, the Fpanel (short for front panel connectors ) must be connected. This panel controls such things as the power button, reset button, hard drive light, and power . Connections for the power button, reset button and status LEDs are all grouped together.
Please like, share and subscribe - thanks!
Visit the main website for in depth r.
How to connect front panel connectors to the motherboard .
See how to connect front panel connectors to the motherboard. This includes connecting the power switch, reset switch, hard drive LED light, power LED light. The missing pin location is blocked by most front-panel USB connectors to assure that the connector is polarized correctly. A reversed connection would damage the motherboard , so 4-pin, 8-pin, or single-row internal break-out cables require special care. Making all the necessary motherboard connections after the motherboard is installed in the Antec case.
We bundle all the loose leads together and cable tie them to the exhaust fan frame. These connectors are used to link to the front-panel USB ports on PC cases. SATA connectors : These components connect via cables to various storage devices, including hard-disk drives, solid-state drives, and optical drives.
IDE connector : Rarely found today, IDE connectors were . First, identify the different cables that are attached to your case. These are usually bundled together near the bottom, and the computer connectors on the end of the wires are labeled. You will see things like HD Power, PWR, etc. Look on your motherboard for the front panel connection area. The computer case provides system panel cables that need to be connected to the system panel connectors on the motherboard.
It is these cables that allow the power and reset buttons on the front of the case to work, the . Tuck excess cable into spare drive bays and use zip ties to bundle cables together. Make sure that all of your components have room to breathe. The System panel cables , as shown in the picture are two wire cables that are color coded to help identify where they connect to the motherboard system panel connector. The cables , colors, and connections vary .
No comments:
Post a Comment
Note: only a member of this blog may post a comment.