Model railway point switches

Point motors are used to remotely control model railway points. They are ideally used for points . Model Railway Electrics - Point Motors. Both these examples are included . Toggle switches are popular with railway modellers, they are fairly robust, easily fitte neat and modestly priced.

Momentary SPDT switches are very suited to operating this type of point motor.

The main model railway uses for push button switches are for switching point motors and for activating isolation sections .

Ideal for operating solenoid point motors on model railways. On these type of points the frog and point blades switch the rail power and they are self isolating, providing track power only to the direction the point is set to. But the basic idea is the same, in that at some time in the overall hobby of model railways you will have to carry out at least some basic electrical wiring. Most modellers control point motors using push buttons, momentary contact switches , probe and contact systems, etc. Beginners guide to understanding the most common model train switches , correct terminology, and uses for your model railroad.

The second most asked question at exhibitions is about point switching and wiring. No matter what scale you will model in, DO NOT even consider using insulated frogs! LED wiring so basic trackwork wiring remains clear. Do not forget to put insulated rail joiners where points face each other (pink rings). The term Frog refers to the crossing point of the two rails.

To further elaborate we also have the check railsанаblack pieces in between the Stock and Switch rails, The blades that set the direction, Tie bar used to keep the blades at the correct distance from each other, Stock rails that . Up until recently all points were fitted with under rail wiper contacts on the switch rails which engaged when in contact with . Gaugemaster Seep PmPoint Motor With Built-in Polarity Switch . Micro Servo Mounting bracket model rail point motor PLS-1PLS-1RC SG90. We now move back indoors for the next few videos. It can also be mounted under the base board. Limits subsequent points current to prevent coil burn out.

This version has one capacitor rated at 700uF, to ensure responsive action when switching two. Turnout Motor ( Switch Machine) - With Extended Drive Pin. Your local online model railway specialist.