Tektronix probe tips

Usable with scopes having Bandwidth up to 1MHz . The small compact probe head and versatile attachment accessories allow direct connection to the device under test. The small probe head geometry and assorted probe tip accessories allow these probes to easily accommodate manual probing of surface-mount devices while . Probes are vital to oscilloscope measurements. There has to be some kind of electrical connection, a probe of some sort.

Interactive Probe Selector Tool.

Need help finding the right probe for your application?

Furthermore, the inductance of flying leads make them unsuitable for high frequency signals. This cable has two main benefits: it protects the signal from external electromagnetic interference, . Measurement Accuracy Begins at the. Do not exceed the maximum signal levels of the accessory or the attached instrument, as defined in the specifications and operating information.

These probes are supplied with two sizes of hook tips and have an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe. Differential signaling used in high speed serial standards requires very accurate characterization. The right probes matched to your oscilloscope are vital to achieving the greatest signal fidelity and measurement accuracy.

When making measurements on electrical or electronic systems or circuitry, personal safety is of paramount . Position the base of the probe holder on your circuit where it can maintain stability while contacting the test point. If you are probing circuitry with dense contacts such as IC pins,. Not only is this innovation able . Tektronix recommends that you use insulated probe tip . Readout Coding for 10X Attenuation - Reduces confusion and errors in measurement readings. Gold-plated Replaceable Probe Tips - Improved electrical . Not sure where the source of the problem with your high-speed design is?

These are common situations that engineers often find themselves in. IC designs, communication applications, and disk drive applications. Figure 16: P77STFLXA solder tip attached with 2mils (mm) wires (rise time = ps). Figure 17: P77STFLXA solder tip attached with 3mils ( mm) wires (rise time = 4 ps). The reference contact ring (see below) is always the same voltage as the reference lead.

To avoid arc flash, always ensure the insulation sleeve or hook tip is installed to cover the reference contact ring. Other than accessories, only the probe tip is replaceable. Replacement probe tips are available as optional accessories.

Refer to the replaceable parts list at the end of this manual for more information.