Used for the internal wiring of lighting luminaires , our lighting cables is competitively priced and available for delivery to site or to your local CEF branch. Paulmann Licht is one of the leading companies in the german light industry with over 5lamps and luminaires in total. These cables are primarily used in commercial construction projects such as casinos, condos, hotels, shopping centers and retail . Armor: Galvanized Interlocking Steel Strip.
Solid or Stranded Copper Conductors.
Insulated Conductor Type THHN or TFN.
Neutral Conductor: White or Gray.
Permits conductors of control circuits to be . Jacketed MC-LED is identified for use in corrosive conditions, such as direct burial in earth or embedded in concrete. Simmtronic Sales can advise on the merits of the various cabling systems. For integral sensor options all luminaires to be . Once the transformer has been installed and all fixture locations determine the next step is to run the correct size cable from the transformer to the fixtures. LED fixtures should be provided between and volts AC.
The product range includes drop wires, clutches, ceiling fixings as well as many unique and diverse ways of attachment to the luminaire. Retrofit or new build using our cable systems has never been easier. The linear damp-proof luminaires of the NEPTUNE LED family with tough and impact-resistant housings are designed for challenging ambient conditions with high humidity and high particle loads. Longitudinal prisms integrated in the PC cover provide homogeneous, extremely wide light distribution.
A single, four-core cable attached to the luminaire is all that is needed – the PowerSync TM Data Injector on the circuit does the rest. A fourth core in the luminaire cable carries the PowerSync TM signal . LIGHTING CABLE MANAGEMENT - SMARTSCAN. Hub connection lead stripped at one end 0. Check that the total load on the circuit including when this luminaire is fitted does not exceed the rating of the circuit cable , fuse or circuit breaker. This luminaire is of class II construction and must not be earthed.
The temperature at the cord entry to luminaires is often very high, especially where filament lamps are used. The luminaire is equipped with cable entries on the back.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.