How to calibrate an oscilloscope

The process begins with checking and adjusting the power supplies, then . Jabatan Kejuruteraan Elektrik, Politeknik Tuanku Sultanah Bahiyah. An oscilloscope is an invaluable tool for your electronics workbench. The steps you must follow when calibrating an oscilloscope depend on the make and model, . First, set all of the buttons and switches to their normal positions.

This means, all push button switches should be in the out position, all slide switches .

Oscilloscope Calibration Techniques.

Our experience and understanding of the problems faced when performing calibration of oscilloscopes. Thanks for your time, we hope you. Many oscilloscopes come out of the box already calibrated. This short video is basic guideline on how to handle the oscilloscope in the correct way, know the major function of the front panel of oscilloscope and correct way to do calibration using an oscilloscope. V DC, measure the raw number which . I have the Tektronix service manual that describes in detail all the steps to perform.

This chapter briefly describes these things. Setting oscilloscope controls, calibrating the oscilloscope , connecting probes, and compensating the probes are also . Before calibrating the probe, verify that the Infiniium oscilloscope has been calibrated recently and that the calibration ∆ temperature is within ±°C. If this is not the case, calibrate the oscilloscope before calibrating the probe.

This information is found in the Infiniium Calibration dialog box. For the socketed probe hea insert . Tektronix multi-brand calibration provides fast, accurate calibration services for oscilloscopes. The product is used in conjunction with the oscilloscope software to perform probe deskew and DC calibration as shown in Figure 12. Information in this publication replaces all previously corresponding material.

Step 9: Calibrate the Positive Power Supply. RIGOL shall not be liable for . Connect the red wire ( positive supply) to the positive probe of the DMM. A quick internet search will demonstrate that these things are usually not cheep, of course. This document reports on the calibration of the equipment for voltage measurements.

A precise multimeter was used to calibrate the DSO. The calibration was performed by . If your scope is giving inaccurate , it is time for your scope to be calibrated. Calibrating your oscilloscope will maintain the integrity of your research. If the oscilloscope is out-of-tolerance .