CresFiber, Riser, FI4B004RBA, Download. The electrical and dimensional properties of this product are measured by the. Technical and Quality Assurance department at the Eland Cables laboratory.
Cable performance in respect of conductor resistance, construction quality ( workmanship), dimensional consistency, and other parameters are verified to published . Inductance: Description Inductance.
Characteristic Impedance: Description Impedance (Ohm).
For serial only connections use.
Material manufactured prior to the. NEMA compliant enclosures also available. The following cable strategies may be used for wiring the iCAN network. DMX lighting control cable is based on. RS-4data cable, 120Ω impedance and a. NOTE: The use of CAT5e or CATcable for bus wiring is no longer recommended.
P - Composite Multimedia Control Cable for Special Application Audio . At the last control station or dimmer cabinet on both ends of run , . Standard voltage drop for DC power systems can be used. CANnet cable type – Cooper LCCNP (Non Plenum) Cable or. Maximum length of cable run for the iLight Network is 500m.
Other acceptable cables include the following. If necessary, install termination jumper. Termination is required only at both ends of the run. DO NOT terminate mid-point devices.
Avoid close proximity to any AC wiring. Use RS4compatible cable for the communications. Long Cable Runs with Separate Cable for DC Power and Audio. Chapter 3: Powering UP-4XP Loudspeakers.
Connecting UP-4XP Loudspeakers to the MPS-488HP External Power Supply. Connecting UP-4XP Loudspeakers to . Belden offers several other cable .
No comments:
Post a Comment
Note: only a member of this blog may post a comment.